The 1984-1985 Corvette used an additional seal that was placed in the rear spindle knuckle to keep dirt, grit and water out and off of the bearing/seal assembly. This seal can installed in all C4 1984-1996 rear suspension spindle knuckles to keep the bearing and seals clean. The seal fits in the spindle knuckle and the yoke is machined in the same manner whether you have a 1984 or 1996 suspension assembly.There is less chance of water or dirt entering the area between the spindle bearing yoke splines and the bearings seal area.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Chevrolet |
Corvette |
1984 - 1996 |
