Rag joints provide a small amount of flex for a steering shaft within a few degrees of the same plane as the steering gear input shaft. It also provides some damping of vibration coming from the steering system, providing some isolation…
This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler Specs:
Shaft Size: 3/4" coarse spline with flat at bolt head side
Spline Count: 25
Total OD: 3-1/4"
Bolt Size: 5/16"
Bolt…
OER® Authorized reproduction of the original steering coupling joint for various models. This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler specifications:
Shaft size: 3/4" fine…
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully…
On some factory applications, a flexible coupling or Rag Joint was used to attach the column to the steering box when there was perfect alignment. If the original column or box is changed, the stock coupling may not work. Borgeson offers…
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully…
Shaft size: 3/4" fine spline without flat at bolt head side
Spline count: 32
Total OD: 3-5/32"
Bolt size: 5/16"
Bolt spacing: 2-3/8" center to center
Pin diameter: 5/16" & 3/8"
Pin spacing: 2-1/2" center to…
OER® Authorized reproduction of the original steering coupling joint for various models. This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler Specs:
Shaft Size: 3/4" coarse spline with…