Due to the popularity of our forged CS21 made for the Shelby GT350, Carroll Shelby Wheel Company is happy to announce the CS5 – a wheel with the same great styling of the CS21 offered in standard Mustang fitments. Featuring sharp, elegant lines and flow-formed construction, the CS5 comes in 19x9.5 +34ET and 19x11 +50ET sizes. Independently tested in the USA to SAE J2530 safety and durability standards, the CS5 is not only light on weight - weighing in at only 23.5lbs front and 24.5lbs rear - but guaranteed strong. Available in Gunmetal, Gloss Black, and Chrome Powder finishes.
+50MM OFFSET REAR ONLY
Installation Notes:
When fitting a wheel that is wider than 10.5" on the rear of the S197 (2005-14 Mustang), you will need to install an adjustable panhard bar in order to center your rear end. When using wider tires on the back of an S197 Mustang (particularly when the vehicle is lowered) you will notice that the rear end may shift to one side resulting in a lopsided appearance. The adjustable panhard bar will allow you to correct this issue. The vehicle application data for this wheel is a general guideline only. Check bolt pattern, width, back-space (or offset), center bore, and brake caliper clearance to confirm that the desired wheel will fit your vehicle. Many vehicles have been modified & these changes may cause wheel fitment issues (i.e. axle swaps, disc brake / big brake conversions, suspension changes, and other modifications). ALWAYS verify the wheel actually fits on your vehicle BEFORE mounting tires. Wheels are non-returnable after tires have been mounted.
About Carroll Shelby Wheels
Since the 1960s, Carroll Shelby built his reputation on simply taking cars and making them better. Whether is was the GT350 Mustang, Dodge Omni, Dodge Viper, or the AC Cobra, adding Carroll Shelby to the equation always yielded results. That remains true today with Carroll Shelby Wheels. We build premium cast, flow-formed, and forged wheels for three of the most iconic vehicles in the world; late model Ford Mustangs, F-150s, and Jeep Wranglers. Since our wheels are designed specifically for these vehicles, no adapters, spacers, or any additional work is needed to bolt a set of Carroll Shelby Wheels on to change the attitude of your Ford or Jeep.
